It’s not always easy to determine the draw length for a compound bow when you don’t own one of these bow hunting machines. This is especially true if you live in a state with a ban on taking deer using archery equipment. So what are you supposed to do?
This is the ultimate guide on how to adjust the draw length on a PSE compound bow? We’ll discuss everything from the PSE bow to the bowhunter, so you know how to adjust this thing the right way.
There are many different variables to take into consideration, like weight, draw length, how much draw weight is available, and so on, so we decided to write this blog post to help you make the best decision possible.
How to Adjust Your Draw Length on A Pse Compound Bow:
In this post, I’ll help you figure out what you need to do to adjust your draw length on a PSE compound bow. I’ll walk through each part of the process step-by-step, and then we’ll review some other important points before we wrap up the post.
Step 1. Identify the Part of Your Bow You’re Adjusting:
The first thing you want to know is which part of the bow you’re adjusting. The most common place this happens is when you’re drawing the bowstring back.
That’s where the power is generated, so if you’re adjusting it, chances are you’re going to be adjusting your arrow speed. You can change the draw length on the whole bow, but you can also change it on specific parts of the bow.
So what do I mean by draw length? For an arrow to fly correctly, you need to get the right distance between your arrow and the string.
How to Find the Distance Between Arrow and String?
How far away your arrow needs to depend on a few things:
- The type of arrow you use (this varies depending on which model of bow you own)
- How much pull you generate with your arm (this will depend on a few factors, such as your strength, how you hold the bow, etc)
- How fast you pull back the bowstring (again, this is a function of several things, including your strength, how you hold the bow, etc)
Simple Way to Figure Out How Far the Bow String Needs to Be
When it comes to your arrows, there’s an easy way to figure out how far you need to set them apart from the bow’s string.
- The “zero line” on your bow is usually centered over the middle of the grip, so if your arrow is perfectly centered over the grip, then you need to move your arrow by that much.
- The distance from the zero line on the bow to where your arrow starts flying is called the “draw length”. This is the distance you should adjust. If you have a shorter draw length, you’ll need to pull your arrow farther back. If you have a longer draw length, you’ll need to pull it forward.
Step 2. Set the Distance to The Correct Distance from The Zero Line:
This is the hardest part. There are three main options:
• You can use your hand to measure the distance. This works well, but only if you’re very accurate with it and you want to be consistent.
• You can use an adjustable gauge with a string that goes through the center. It’s a little more accurate, but you need to set the correct distance every time you want to adjust.
• You can also buy a simple dial gauge with a string that goes through the center. It’s the easiest way to set your draw length, but it requires a little more setup and maintenance.
Once you’ve measured or determined the distance between the center of your grip and the zero line, you can adjust your draw length by moving your arrow back or forward a certain amount.
Step 3. Practice Your New Draw Length:
This is where most of us fall. We’re used to our normal draw length. We’re so comfortable with it that we forget how to do it properly. It’s easy to go overboard and get too high or too low, so you need to start slow, work your way up, and make sure you’re consistent before you decide whether you like the results or not.
What Should You Practice?
Well, you can either practice with the same arrow every time or you can use different arrows. If you’re using the same arrow every time, you can get good at it quickly if you practice shooting just one or two arrows at a time. But if you use different arrows, it takes more time, but you can learn to get a feel for the range you need.
What Else Should You Practice?
Well, first you need to know how far apart your arrows should be. In this case, you want them to be centered over the middle of the grip, but once you get used to your new draw length, you’ll want to be consistent with it. That means you want to shoot an arrow in your hand, adjust the draw length, and shoot another arrow with the same results every single time.
When you do this, you must do it on dry land. This will help make sure your arrows are moving at a constant speed and that they’re not being affected by wind. Once you’ve practiced your new draw length and are getting consistent, it’s time to put it to use.
Wrapping It All Up:
In conclusion, the great thing about a PSE compound bow is that it offers the perfect balance between versatility and affordability.
The ability to adjust your draw length allows you to have a bow that’s just right for you. It’s one of the most popular types of compound bows on the market today.
I think it’s a great option if you want a bow that’s as versatile as possible, but not as expensive.
